Mobir italia Division of Electronics company 

 

Automotive Application

Find faulty fuel injection nozzles  Evaluate brake and engine systems evaluation for performance and cooling efficiencies  Diagnose motor racing suspension and tire contact diagnostics   Others

Building Envelopes and Structures

Correcting defects of construction plays a significant role in increasing building efficiency and structural integrity. Based on the mechanism that surface temperature variations of the building envelope indicate problems in structure, thermal bridging, moisture content and air leakage, infrared thermography makes the above mentioned task easy enough by identifying heating and cooling loss due to poor construction, missing or inadequate insulation and moisture intrusion.

Inspection of conductive losses Evaluate moisture contamination in buildings, condos, plants facilities Inspect concrete water heated floors for leakage and temperature distribution Detect delaminations in concrete bridge deck Location of missing or damaged insulation Evaluate thermal performance of retrofit for heating system and etc Identify air leakage & energy loss Locate radiant heating wires or pipes. Inspect concrete integrity Inspect power generation generators Others

Electrical Systems

It is abnormal heating associated with high resistance or excessive current flow that causes many problems in electrical systems. Infrared thermography enables us to see these invisible thermal signatures of impending damage before the circuit becomes hot enough to cause an outage or explosion.

Inspection of power generation generators Substation electrical inspection Transformers and capacitor evaluation Electrical motor inspection Inspection of over- head urban and rural electrical distribution Discovery of contact problems Detection of overloaded circuit problems Inspection of load requirement Others

Mechanical Systems

IR thermography is very helpful to inspect diverse mechanical equipment as it shows clearly heat related failure mechanisms with thermal images during startup and cool down as well as during normal operation. Using easily deployable infrared cameras to prevent electrical and mechanical failures by carrying out traditional predictive maintenance with such equipment can minimize costs and enhance productivity by averting failures.

Inspect burners for flame impingement and burner management Observe combustion patterns of fuel Inspect boilers Detect thermal patterns on boiler tubes and measure tube skin temperature during Monitor normal operation or when boiler is on standby Scan and record temperatures in areas of boiler not monitored Scan the exterior of boiler for refectory damage or locate warmer areas where potential refectory damage may occur Detect coke buildup in crude furnaces Detect leak of flue gas of power plant boiler Detect mechanical bearing Evaluate heat ventilation/ air conditioning equipment Prevent cooling loss of cold storage Detect insulation leaks in refrigeration equipment Others

Roofing Systems

The physics used for thermal roof inspections is that dry roof insulation heats up and cools down faster than wet roof insulation. Infrared inspection goes beyond simply finding a leak by locating the extent of the moisture invasion of the insulation. Instead, we use infrared cameras to test and capture images of temperature difference between the daytime and night.

Detect flat roof leakage for buildings, plants, facilities Identify water damaged portions of a roof Eliminate unnecessary replacement of good roofing Others

Moisture

Moisture accumulation due to condensation or leaks is a common candidate for mold growth. Yet there is no practical way to eliminate mold spores in an indoor environment. The best way to control mold growth is to control moisture. Infrared inspection is a fast, non-invasive method to discover moisture intrusion within the building envelope. Infrared inspection does not directly detect the presence of mold but find moisture where mold may develop.

Design Validation Advanced Prototype Evaluation High Frame Rate Scene Analysis Signature Analysis Advanced Prototype Evaluation

INDUSTRY

MEDICINE -  SAFETY - OTHERS applications

Copyright Mobir Italia

via pediano 3a 40026 imola italy

ph. ++ 39  0542 600108  email admin@termocamera.com